NEW

LINEAR EFFECTS
CONTINUOUS ROD MINIMAL SURFACE RGBW
S.2318J
module LED RGBW W=2700K 24Vdc DIMMABLE PWM

Rated module luminous flux:: 645lm
Rated luminaire luminous flux: : 576lm
Rated luminaire power: : 30.9W
Luminaire efficacy: : 19lm/W
Voltage (DC): 
See the SIMES power supply accessories list on the following pages: 24Vdc
Dimmable: : PWM
Electrical insulation class: : III
Protection class IP: : IP65
Mechanical resistance: : IK08
CE 

LUMINAIRE TYPE
Wall or Ceiling mounted luminaire. IP rating IP 65
MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 (Minimal) or EN AW-6060 (Comfort) caps for the extruded parts.
Extra-resistant Painting Process: 
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012). 
Mechanical resistance IK 08 
LIGHTING PERFORMANCE
Continuous light source made of opal silicone. Lamp  fixed position. LOR -- 
INSTALLATION AND MANTEINANCE
Continuity: Continuous Rod Minimal can be installed continuously to create uniform light lines of the desired length. The angular acessories can create angles at 90° for single flat surfaces or for two perpendicular flat surfaces. The light source is delivered in a continuous length of max. 3m. The aluminium profile comes in lengths of 1m, 2m or 3m, alignable between themselves in a continous and linear manner.
CONTINUOUS ROD MINIMAL SURFACE MOUNT: The extruded profile does not allow supply cables passing through inside. Hence, the corrugated tube for the supply must be installed at the beginning of the luminaire.
CONTINUOUS ROD COMFORT SURFACE MOUNT: is made up of a light source delivered with cable and of an extruded profile that allows the placement of the plastic through wiring duct (22mm x 10mm max.) and the passage of the cable inside. Moreover, the supply cable of the luminaire next to it may also be fitted. Hence, according to the location of the corrugated tube, up to 4 luminaires may be powered (the maximum length being 12m).
Cutting off: The Rod can be shortened according to the pitch indicated on the back of each LED strip, which varies according to the light source. To guarantee the IP65 degree of protection, it is necessary to glue the silicone cap with acetic glue, both supplied. 
WIRING
Supply 5m cable section type SILICONE. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 2.9995 Kg Glow Wire test: --
LED module included
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): G.
LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.


WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty