Code S.2250T TILTABLE ROD TUNABLE WHITE|Simes S.p.A.

S.2261J

S.2260T

Technical data

picture

dimensions

Anodized Aluminium

Detailed technical drawing

.01

.13

* Photometric measured @ 4000K

PRODUCT DESCRIPTION

LUMINAIRE TYPE
Wall mounted luminaire. IP rating IP 65

MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Steel screws treated with an advanced anticorrosive coating. Pre treated Silicone Gaskets. Mechanical resistance IK 08

LIGHTING PERFORMANCE
The spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Coextruded transparent polycarbonate diffuser 1,5 mm thick with a 50 micron protective layer against UV rays. Lamp fixed position. LOR --

INSTALLATION AND MANTEINANCE
The lighting body rotates on its own base of 120° up and down to achieve high planning flexibility in the three installation options: wall, floor and ceiling. The adjustable rod succeeds in offering an original elegance, supported by a clear and minimal profile with a very simple design with no visible cables and screws.

WIRING
Supply 4m cable section type SILICONE. Isolation: CLASS III . Available colours: White (cod.01), Anodized aluminium (cod.13). Weight: 1.9971 Kg Glow Wire test: -- LED module included
REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): G.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty

TILTABLE ROD TUNABLE WHITE

Art. S.2250T

MODULE LED TUNABLE WHITE 2700K-4000K

Light Source Technical Data

Light source type:	LED
Colour temperature:	TUNABLE WHITE 2700K-4000K
Rated module luminous flux:	715lm
Rated luminaire luminous flux:	410lm
Rated luminaire power:	6.6W
Luminaire efficacy:	62lm/W
ULR:	0%
Color Rendering Index:	CRI 80

Power Supply Technical Data

Voltage (DC): See the SIMES power supply accessories list on the following pages	24Vdc
Dimmable:	PWM

Temperature and life time Technical Data

LED Lifetime:	L80 B10 70.000h Ta 25°C L80 B10 50.000h Ta 40°C
Lifespan of the LUMINAIRE:	min. 70.000h Ta 25°C min. 50.000h Ta 40°C
Performance ambient temperature:	Tq 25°C
Operating ambient temperature range:	da -20°C a +50°C
Storage temperature range:	da -20°C a +60°C

Technical Installation Data

Electrical insulation class:	III
Protection class IP:	IP65
Mechanical resistance:	IK08
Weight:	1.9971Kg
Power cable:	4m - SILICONE

WARRANTY

All Simes products are covered by an extended 5-year warranty. For terms and conditions, see www.simes.it/warranty

Documentation

mounting instruction sheet

.PDF

family catalogue

.PDF

Conformity Declaration

Design tools

Professional tools only for registered users Register here

2D and 3D models

BIM

2D model

.DXF

Archicad

.LCF

3D model

.3DS

Revit

.RFA+TXT

3D model for 3D Studio Max

.MAX

SketchUp

LIGHT CALCULATION

PHOTOMETRIES

DIALux

Ies

.IES

Relux

Eulumdat

.LDT

DOWNLOAD

loading zip file ...

Accessories

24V tunable white

S.2470
POWER SUPPLY DMX 75W 230Vac/24Vdc IP20 TUNABLE WHITE

remote power supply DMX for TUNABLE WHITE LED 75W 240V/24V PWM The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 295 x 43x 29,8mm

S.2475
POWER SUPPLY DIMMABLE 75W 230Vac/24Vdc IP20 TUNABLE WHITE DALI DT8

Dimmable DALI DT8, PUSH DIM for TUNABLE WHITE LED 75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 295 x 43x 29,8mm

S.2480
POWER SUPPLY TUNABLE WHITE IP55 60W 230V/24V PWM DMX MAX 5 OUTPUTS

IP55 box with 60W power supply 240V/24V PWM controlled by DMX protocol. The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 260mmx260mmx100mm

S.2485
POWER SUPPLY TUNABLE WHITE IP55 60W 230V/24V DALI DT6 MAX 5 OUTPUTS

IP55 box with 60W power supply 240V/24V PWM dimmable DALI DT6 ( operating mode BALANCE & DIM). The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 260mmx260mmx100mm

S.2486
POWER SUPPLY TUNABLE WHITE IP55 60W 230V/24V DALI DT8 MAX 5 OUTPUTS

IP55 box with 60W power supply 240V/24V PWM dimmable DALI DT8 ( operating mode BALANCE & DIM). The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 260mmx260mmx100mm

S.2453
MULTIZONE ZONE TOUCH PANEL FOR RGBW/RGBCW/TUNABLE WHITE DMX

The RGBCW Touch Panel is an intelligent control device designed to provide precise and intuitive management of DMX lighting systems, including Tunable White (TW), RGBW, and RGBCW. Thanks to Bluetooth technology, it offers simple, reliable, and fully wireless operation (local control only, not remote). With the dedicated App available on both the App Store and Google Play, you can configure, program, and control all panel functions quickly and intuitively from your smartphone or tablet. Main Features: Full control of RGB + C + W or TW channels Brightness and color temperature adjustment Multi-zone management (up to 4 zones) and creation of customized lighting scenes Stable and secure Bluetooth communication Tempered-glass touch interface with a modern, elegant design The RGBCW Touch Panel is the ideal solution for residential and straightforward professional applications that require flexible and reliable lighting control.

S.2476
INTERFACE DALI DT6

The following devices/interfaces are used to control the color, temperature and brightness of the TUNABLE WHITE LED via DALI (DT6 ) signal. These devices need a 24Vdc power supply Not Dimmable ( type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 96W. IP67 Operating mode BALANCE & DIM Require remote power supply 230V/24Vdc Dimensions 175,5mmx86,5mmx43mm

S.2477
INTERFACE DALI DT8

The following devices/interfaces are used to control the color, temperature and brightness of the TUNABLE WHITE LED via DALI (DT8 ) signal. These devices need a 24Vdc power supply Not Dimmable ( type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 96W. IP67 Operating mode BALANCE & DIM Dimensions 175,5mmx86,5mmx43mm

S.2478
INTERFACE DALI DT6

The following devices/interfaces are used to control the color, temperature and brightness of the TUNABLE WHITE LED via DALI (DT6) signal. These devices need a 24Vdc power supply Not Dimmable ( type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 96W. IP20 Operating mode BALANCE & DIM Require remote power supply 230V/24Vdc Dimensions 28mmx14mmx33mm

S.2479
INTERFACE DALI DT8

The following devices/interfaces are used to control the color, temperature and brightness of the TUNABLE WHITE LED via DALI (DT8) signal. These devices need a 24Vdc power supply Not Dimmable ( type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 96W. IP20 Operating mode BALANCE & DIM Require remote power supply 230V/24Vdc Dimensions 28mmx14mmx33mm