Loading...
Technical data
fascio luce
fotometria
tablux
PRODUCT DESCRIPTION
LUMINAIRE TYPE
Wall mounted luminaire. IP rating IP 66

MATERIAL CHARACTERISTICS
Die-cast EN AB-44300 and extruded EN AW-6060 aluminium housing with high corrosion resistance. Stone wash surface treatment prior to painting process. Steel Allen screws with insulating treatment against galvanic corrosion. Silicone Gaskets. Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
Mechanical resistance IK 07

LIGHTING PERFORMANCE
Transparent extraclear toughened glass diffuser 5mm thick. LOR --

INSTALLATION AND MANTEINANCE
Tratto 50 has a particular flexibility linked to its joining system that allows the luminaires body to slide and to be configured in relation to the context and the fixing surface. In fact, its support arms slide inside special guides provided in the luminaires body and can be locked at any point of length. Such grooves are located both below and on the side of the linear body. This important detail allows to anchor the supports in two different ways and to transform Tratto 50 from a projector for ground installation to a wall washer wall projector.

WIRING
Luminaire supplied with neoprene 5,0m H05RN-F cable and connector for remote connections. Isolation: CLASS III . Available colours: Black (cod.09). Weight: 3.0145 Kg Glow Wire test: -- LED module included
REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): G.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty
TRATTO 50 MEDIUM MONOCHROME
Art. S.2162W
MODULE LED 3000K
Light Source Technical Data
Light source type: LED
Colour temperature: 3000K
Rated module luminous flux: 2273lm
Rated luminaire luminous flux: 1630lm
Rated module power: 28.8W
Rated luminaire power: 28.8W
Luminaire efficacy: 57lm/W
Color Rendering Index: CRI 80
Standard Deviation Color Matching: MacAdam step 3
Beams available on request: 31°, 12°x40°
Power Supply Technical Data
Voltage (DC): See the SIMES power supply accessories list on the following pages 24Vdc
Dimmable: PWM
Temperature and life time Technical Data
LED Lifetime: L80 B10 70.000h Ta 25°C L80 B10 50.000h Ta 40°C
Lifespan of the LUMINAIRE: min. 70.000h Ta 25°C min. 50.000h Ta 40°C
Performance ambient temperature: Tq 25°C
Operating ambient temperature range: da -20°C a +50°C
Storage temperature range: da -20°C a +60°C
Technical Installation Data
Electrical insulation class: III
Protection class IP: IP66
Mechanical resistance: IK07
Weight: 3.0145Kg
Power cable: 5m - H05RN-F
WARRANTY
All Simes products are covered by an extended 5-year warranty. For terms and conditions, see www.simes.it/warranty
Accessories
Base for surface application
S.4330
FIXING WALL LIGHTS ACCESSORY ON INSULATION PANELS
Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 119 × 119 mm NB: Multiple accessories can be positioned side by side to create a larger mounting surface for the light fixture. It is therefore recommended to check the installation instructions for each individual light fixture to determine the exact dimensions of its mounting surface.
S.4331
FIXING XL WALL LIGHTS ACCESSORY ON INSULATION PANELS
Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 238x238mm
Stake
S.1309
STAKE IN POLYPROPYLENE
Colour: black (code 09)
Total length = 350 mm
Visor
S.2169
VISOR
In aluminium Colour: black (code 09)
Remoted power supply
S.2401
POWER SUPPLY NOT DIMMABLE 18-60W 230Vac/24Vdc IP20
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 225 x 43 x 29,8 mm
S.2405
POWER SUPPLY NOT DIMMABLE 0-60W 230Vac/24Vdc IP67
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 150 x 53 x 35 mm
S.2421
POWER SUPPLY DIMMABLE DALI, PUSH DIM e DSI 60W 230Vac/24Vdc 1KHz IP20
Dimmable DALI, PUSH DIM, DSI for monochromatic LED 60W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV PWM Frequency : ~1KHz Dimensions 225 x 43x 29,8mm NB: not suitable for Family products NANOLED STAINLESS-STEEL
S.2427
POWER SUPPLY DIMMABLE 1-10V0- 60W 230Vac/24Vdc 1,47KHz IP67
Dimmable 1-10V for monochromatic LED 0-60W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 1,47KHz Dimensions 150x53x35mm NB: not suitable for Family products NANOLED STAINLESS-STEEL
+ Additional alternative Remoted power supplies
S.2402
POWER SUPPLY NOT DIMMABLE IN BOX 60W 230Vac/24Vdc IP55 MAX 5 OUTPUTS
Dimensions: 260 x 240 x 100 mm.
Cable IN: 2 with cable glands PG11
Cable OUT: 5 with cable glands PG11
IP55 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver.
S.2403
POWER SUPPLY NOT DIMMABLE 100W 230Vac/24Vdc IP20
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 295 x 43 x 29,8 mm
S.2404
POWER SUPPLY NOT DIMMABLE IN BOX 90W 230Vac/24Vdc IP55 MAX 5 OUTPUTS
Dimensions: 260 x 240 x 100 mm.
Cable IN: 2 with cable glands PG11
Cable OUT: 5 with cable glands PG11
IP55 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver.
S.2406
POWER SUPPLY NOT DIMMABLE 0-90W 230Vac/24Vdc IP67
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 171 x 63 x 37,5 mm
S.2445
POWER SUPPLY NOT DIMMABLE 0-120W 230Vac/24Vdc IP67
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 191 x 63 x 37,5 mm
S.2446
POWER SUPPLY NOT DIMMABLE 0-320W 230Vac/24Vdc IP67
In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS I SELV Dimensions: 252 x 90 x 43 mm
S.2416
POWER SUPPLY DIMMABLE 230Vac/24Vdc 75W 244Hz IP67
Dimmable DALI 2 for monochromatic LED 75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 244Hz Dimensions 280 x 40x 28mm
S.2423
BOX WITH DIMMABLE POWER SUPPLY DALI2, 1-10v e PUSH-DIM 60W 230Vac/24Vdc 2kHz IP55 MAX 5 OUTPUTS
60W 230Vac/24Vdc Dimensions 260mmx240mmx100mm PWM Frequency : 2kHz IP55 SELV CLASS II NB: not suitable for Family products NANOLED STAINLESS STEEL
S.2425
BOX WITH DIMMABLE POWER SUPPLY DALI, 1-10v e PUSH-DIM 90W 230Vac/24Vdc 2kHz IP55 MAX 5 OUTPUTS
90W 230Vac/24Vdc Dimensions 260mmx240mmx100mm PWM Frequency : 2kHz IP55 SELV CLASS II NB: not suitable for Family products NANOLED STAINLESS STEEL
S.2426
POWER SUPPLY DIMMABLE DALI 2 0-120W 230Vac/24Vdc 2,5KHz IP67
Dimmable DALI 2 for monochromatic LED 0-120W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 2,5KHz Dimensions 191 x 63x 37,5mm NB: not suitable for Family products NANOLED STAINLESS STEEL
S.2429
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-75W 230Vac/24Vdc 3,6KHz IP20
Dimmable DALI2, PUSH DIM for monochromatic LED 0-75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz
S.2442
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 0-10V, 1-10V 230Vac/24Vdc 75W 244Hz IP20
Dimmable DALI2, PUSH DIM, 0-10V, 1-10V for monochromatic LED 75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV PWM Frequency : 244Hz Dimensions 280mmx40mmx29mm
S.2447
POWER SUPPLY DALI2 0-200W 230Vac/24Vdc
Power supply for monochromatic LED 0-200W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions 195x68x39mm
S.2449
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-100W 230Vac/24Vdc 3,6KHz IP20
Dimmable DALI2, PUSH DIM for monochromatic LED 0-100W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz
S.2428
POWER SUPPLY DIMMABLE 1-10V 90W 230Vac/24Vdc 1,47KHz IP67
Dimmable 1-10V for monochromatic LED 90W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 1,47KHz Dimensions 171 x 63x 37,5mm NB: not suitable for Family products NANOLED STAINLESS-STEEL
S.2424
POWER SUPPLY DIMMABLE 1-10V, PUSH DIM 60W 230Vac/24Vdc 244Hz IP20
Dimmable 1-10V, PUSH DIM for monochromatic LED 60W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV PWM Frequency : 244Hz Dimensions 125 x 82x 29mm
Dimmer
S.3437
DIMMER DALI2 / PUSH 1-10V IP20
The following devices/interfaces are used to control the color and brightness of the Monochromatic LED through DALI2 / PUSH 1-10V signal. These devices need a 24Vdc power supply Not Dimmable (type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 144W. IP20 Dimensioni 132mmx22mmx19mm
Design tools
Professional tools only for registered users Register here
2D and 3D models
BIM
.DXF
.LCF
.3DS
.RFA+TXT
LIGHT CALCULATION
PHOTOMETRIES
DOWNLOAD
loading zip file ...