Code S.1652N FLOWER 60|Simes S.p.A.

S.1651H

S.1652W

Technical data

picture

dimensions

Dark Green

Detailed technical drawing

.07

.09

.20

.24

* Photometric measured using WHITE LED 3000K

PRODUCT DESCRIPTION

LUMINAIRE TYPE
Projector. IP rating IP 66

MATERIAL CHARACTERISTICS
Aluminium die cast housing in EN AB-44100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Steel screws treated with an advanced anticorrosive coating. Pre treated Silicone Gaskets. Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
The 4 mm thick tempered glass diffuser is fixed to the external body by a silicon resin and positioned flush with the support ring. Mechanical resistance IK 07 Maximum load capacity --

LIGHTING PERFORMANCE
Clear toughened glass 4 mm thick. LOR --

INSTALLATION AND MAINTENANCE
Flower 25 and 35 versions: The lighting fixture can be installed on wall/ceiling (flat surface) or on pole with diameter ø30/40/60mm (round surface)(NOT FOR ARM VERSIONS). Flower 60 and 75 versions: The lighting fixture can be installed on wall/ceiling (flat surface) or on pole with diameter ø60/76mm (round surface)(NOT FOR ARM VERSIONS) with Accessory Anchor Base S.1657 (Flower 60) or with Accessory Anchor Base S.1667 (Flower 75).

WIRING
Luminaire supplied with 5m of bipolar flat cable. Isolation: CLASS III . Available colours: Dark green (cod.07), Black (cod.09), Burnished bronze (cod.20), Anthracite grey (cod.24). Weight: 0.3525 Kg Glow Wire test: --
LED module included

FLOWER REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): F.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty

FLOWER 60

Art. S.1652N

MODULE LED 4000K

Version available on request without price surcharge.

NEW
Product is expected to be available from November 2026

Light Source Technical Data

Light source type:	LED
Colour temperature:	4000K
Rated module luminous flux:	1124lm
Rated luminaire luminous flux:	708lm
Rated module power:	8.4W
Rated luminaire power:	9.5W
Luminaire efficacy:	75lm/W
ULR:	0%
BUG:	B1 - U0 - G0
CIE Flux Code:	99 100 100 100 100
Color Rendering Index:	CRI 90
Standard Deviation Color Matching:	MacAdam step 3
Beams available on request:	24°

Power Supply Technical Data

Voltage (DC): See the SIMES power supply accessories list on the following pages	24Vdc
Dimmable:	PWM

Temperature and life time Technical Data

LED Lifetime:	L80 B10 70.000h Ta 25°C L80 B10 50.000h Ta 40°C
Lifespan of the LUMINAIRE:	min. 70.000h Ta 25°C min. 50.000h Ta 40°C
Performance ambient temperature:	Tq 25°C
Operating ambient temperature range:	da -20°C a +50°C
Storage temperature range:	da -20°C a +60°C

Technical Installation Data

Electrical insulation class:	III
Protection class IP:	IP66
Mechanical resistance:	IK07
Weight:	0.3525Kg
Exposed windage area:	0.0032m²
Power cable:	5m - FLAT

WARRANTY

All Simes products are covered by an extended 5-year warranty. For terms and conditions, see www.simes.it/warranty

Accessories

Poles

S.2800
H 2,5m Ø60mm CYLINDRICAL POLE TO BE BURIED

Cylindrical shaped poles consisting of: straight circular section shaft, Ø 60mm, 3mm in thickness, total length 3,00m, single section built by using longitudinally welded tubes by induction welding (ERW) UNI EN 10219-2-ISO 4200

Suitable for ground recessed installation to a cement base 0,50m: Suggested reinforced concrete footstall dimension 1,0m x 1,0m h 0,7m. Footstall dimension can be calculated according to your country norms and ground properties.

The grade of steel used is S235JR (Fe360B) with material characteristics as per normative UNI EN 10025;

Painting Process: PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1500h.

S.2842
H 3,5m Ø60mm CYLINDRICAL POLE TO BE BURIED

Cylindrical shaped poles consisting of: straight circular section shaft, Ø 60mm, 4mm in thickness, total length 4,00m , single section built by using longitudinally welded tubes by induction welding (ERW) UNI EN 10219-2-ISO 4200

Suitable for ground recessed installation to a cement base 0,50m : Suggested reinforced concrete footstall dimension 1,0m x 1,0m h 0,7m. Footstall dimension can be calculated according to your country norms and ground properties.

The grade of steel used is S235JR (Fe360B) with material characteristics as per normative UNI EN 10025;

The surface protection treatment is done through hot dip galvanization.

Pole adaptor

S.1657
ANCHOR BASE

Thanks to the special anchor base the luminaire can be fixed to new or existing poles of diameter of 60 mm or 76 mm.

Base for surface application

S.4330
FIXING WALL LIGHTS ACCESSORY ON INSULATION PANELS

Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 119 × 119 mm NB: Multiple accessories can be positioned side by side to create a larger mounting surface for the light fixture. It is therefore recommended to check the installation instructions for each individual light fixture to determine the exact dimensions of its mounting surface.

S.4331
FIXING XL WALL LIGHTS ACCESSORY ON INSULATION PANELS

Mounting bracket for insulated walls with insulation thickness from 50 mm to 200 mm. Maximum load capacity: 4 kg Maximum projection: 180 mm Luminaire mounting plate: 238x238mm

Stake

S.1659
STAKE IN POLYPROPYLENE

Colour: black (code 09)
Total length = 300 mm

Visor

S.1658
ANTIGLARE VISOR

Colour: black (code 09)

Remoted power supply

S.2400
POWER SUPPLY NOT DIMMABLE 10-35W 230Vac/24Vdc IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 140 x 43 x 30 mm

S.2401
POWER SUPPLY NOT DIMMABLE 18-60W 230Vac/24Vdc IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 225 x 43 x 29,8 mm

S.2405
POWER SUPPLY NOT DIMMABLE 0-60W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 150 x 53 x 35 mm

S.2406
POWER SUPPLY NOT DIMMABLE 0-90W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 171 x 63 x 37,5 mm

S.2433
POWER SUPPLY NOT DIMMABLE 0-36W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions: 112 x 38 x 25 mm.

S.2445
POWER SUPPLY NOT DIMMABLE 0-120W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 191 x 63 x 37,5 mm

S.2446
POWER SUPPLY NOT DIMMABLE 0-320W 230Vac/24Vdc IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS I SELV Dimensions: 252 x 90 x 43 mm

S.3664
JUNCTION BOX WITH NOT DIMMABLE POWER SUPPLY 0-36W 240V/24Vdc

IP65/67 power supply for: N°4 Micropool LED* o N°1 Minipool LED o N°1 Pool LED maximum load capacity 500Kg Dimensions 200mmx200mmx220mm *= require 2 x S.3670 additional cable gland

S.3665
JUNCTION BOX WITH NOT DIMMABLE POWER SUPPLY 0-90W 240V/24Vdc

IP65/67 power supply for: N°5 Micropool LED** o N°4 Minipool LED* o N°2 Pool LED maximum load capacity 500Kg Dimensions 300mmx300mmx230mm ** = require 3 x S.3670 additional cable gland * = require 2 x S.3670 additional cable gland

S.2415
POWER SUPPLY DIMMABLE 230Vac/24Vdc 0-24W 244Hz IP67

Dimmable DALI2 for monochromatic LED 0-24W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 244Hz Dimensions 185 x 35x 33mm

S.2419
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-36W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-36W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 210mmx43mmx30mm PWM Frequency : <3,6KHz

S.2426
POWER SUPPLY DIMMABLE DALI 2 0-120W 230Vac/24Vdc 2,5KHz IP67

Dimmable DALI 2 for monochromatic LED 0-120W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 2,5KHz Dimensions 191 x 63x 37,5mm NB: not suitable for Family products NANOLED STAINLESS STEEL

S.2429
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-75W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz

S.2442
POWER SUPPLY DIMMABLE DALI2, PUSH DIM, 0-10V, 1-10V 230Vac/24Vdc 75W 244Hz IP20

Dimmable DALI2, PUSH DIM, 0-10V, 1-10V for monochromatic LED 75W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV PWM Frequency : 244Hz Dimensions 280mmx40mmx29mm

S.2447
POWER SUPPLY DALI2 0-200W 230Vac/24Vdc

Power supply for monochromatic LED 0-200W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions 195x68x39mm

S.2447
POWER SUPPLY DALI2 0-200W 230Vac/24Vdc

Power supply for monochromatic LED 0-200W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions 195x68x39mm

S.2449
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-100W 230Vac/24Vdc 3,6KHz IP20

Dimmable DALI2, PUSH DIM for monochromatic LED 0-100W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP20 CLASS II SELV Dimensions 293mmx43mmx30mm PWM Frequency : <3,6KHz

S.2449
POWER SUPPLY DIMMABLE DALI2, PUSH DIM 0-100W 230Vac/24Vdc 3,6KHz IP20

S.2427
POWER SUPPLY DIMMABLE 1-10V0- 60W 230Vac/24Vdc 1,47KHz IP67

Dimmable 1-10V for monochromatic LED 0-60W 240V/24Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV PWM Frequency : 1,47KHz Dimensions 150x53x35mm NB: not suitable for Family products NANOLED STAINLESS-STEEL

S.2448
POWER SUPPLY ON-OFF 0-31W 230Vac/48Vdc IP67

Power supply for monochromatic LED 0-31W 240V/48Vdc The Total power of all connected luminaires may not be higher than the power of the driver. IP67 CLASS II SELV Dimensions 112x38x25mm

S.2430
POWER SUPPLY NOT DIMMABLE MULTI-POWER 230V/250mA-700mA 20W oppure 24Vdc 16W IP20

MULTI-POWER SUPPLY 230V/250mA-700mA Maximum power consumption 20W or 16W 230Vac/24Vdc Dimensions 110mmx50mmx20mm IP20 CLASS II SELV Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

S.2431
POWER SUPPLY NOT DIMMABLE MULTI-POWER 230V/350mA-1050mA 39W IP20

Maximum power consumption 39W Dimensions 130mmx67mmx21mm IP20 CLASS II SELV Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

S.2411
POWER SUPPLY 0/1-10V 230V/700mA 17W o 230V/24V 15W IP68

230V/700mA Maximum power consumption: 17W or 230V/24V Frequency PWM : 240Hz Maximum power consumption: 0-15W Dimensions 122mmx33mmx26mm IP68 SELV CLASS II Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

S.2438
POWER SUPPLY 230V/150mA-900mA 8,1-25W o 230Vac/24Vdc 0-22W 240Hz DALI2 DIMMABLE IN BOX IP67

DALI2 DIMMABLE MULTI-POWER SUPPLY 230V/150mA-900mA Maximum power consumption: 8,1-25W or 0-22W 230Vac/24Vdc Dimensions 175,5mmx86,5mmx43mm PWM Frequency : 240Hz IP67 CLASS II SELV NB: not suitable for Family products NANOLED STAINLESS STEEL Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

S.2443
POWER SUPPLY MULTI-POWER 230V/100mA-800mA DALI2 DIMMABLE, PUSH DIM IN BOX IP67 23W

230V/100mA-800mA Maximum power consumption: 23W Dimensions 175,5mmx86,5mmx43mm IP67 CLASS II SELV Warning!!! Always check the minimum Forward voltage (Vf min) of the fixtures that will be connected to this driver.

Dimmer

S.3437
DIMMER DALI2 / PUSH 1-10V IP20

The following devices/interfaces are used to control the color and brightness of the Monochromatic LED through DALI2 / PUSH 1-10V signal. These devices need a 24Vdc power supply Not Dimmable (type S.2405, S.2406, S.2445 and S.2446) and must be placed between the 24Vdc power supply and the luminaires. Therefore choose a 24V power supply based on the maximum power used of the luminaires up to a maximum of 144W. IP20 Dimensioni 132mmx22mmx19mm

Junction box

S.3660
JUNCTION BOX IP65/67*

Junction box with cable glands for 3 cables IN (possibility of 3 more cables IN with S.3670 accessories) Maximum load capacity 500Kg Dimensions 300mmx300mmx230mm

Connectors

S.3670
1 ADDITIONAL CABLE GLAND

Required for the connection of over 2 luminaires to the junction box S.3660 / power supply S.3664, S.3665, S.3667, S.3668.

Other

S.1607
STRAP FOR APPLICATIONS ON TREES

Black strap, length 2m..

Documentation