LUMINAIRE TYPE
Bollard fitting. IP rating IP 66

MATERIAL CHARACTERISTICS
Cylindrical pole made of high-strength structural steel tube EN10025, designed for direct installation into the ground. Custom-designed access opening with flush-mounted door, dimensions 244x147mm, secured with M8 vandal-resistant button-head screws. Pole hot-dip galvanised according to ISO 1461 and polyester powder-coated. Made of EN10219-1 S355JRH steel (tube). CE-EN40 compliant. Body and door made of die-cast aluminium EN AB-44300 and extruded aluminium EN AW-6060, highly resistant to oxidation. Tumbling treatment to prepare the surface for painting. Steel Allen screws with insulating treatment against galvanic corrosion. Pre treated Extra-resistant Painting Process:
Extra-resistant exterior coating. Product suitable for applications in high-humidity environments, C5 ZONE (according to UNI EN ISO 9223:2012).
Mechanical resistance IK 10

LIGHTING PERFORMANCE
Each spotlight is housed inside a head that can be controlled independently and freely rotated on its axis. Through fixing grains, it can be locked in the desired position. Spotlights integrated in the head can, in turn, be tilted up to a maximum of 90º horizontally and direct the beam downwards or be pushed forward to cover longer distances. The head can also be turned upside down. This additional degree of freedom allows to also direct the beam upwards so to light up, as example, a walkway and an adjacent wall with the same fitting. Version with 20° optics equipped with a honeycomb filter.

INSTALLATION AND MAINTENANCE
The standard pole comes with an adjustable and DALI-dimmable Lighting Head, to which up to four additional heads (one for bollard version) can be added, chosen from: additional lighting elements, an IP67 security camera, an IP65 acoustic speaker or top head ready for a Wi-Fi access point. A door with an electrical socket for charging scooters or e-bikes is also available as an accessory. This flexibility makes it a multifunctional element for security and smart management of public spaces, urban areas, and private environments. The wiring of the fixtures must strictly respect the specifications.
WIRING
Supply 0.2m cable section type H05RN-F . Single cable entry sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Black (cod.09), Anthracite grey (cod.24). Weight: 53.67 Kg Glow Wire test: 850°C
LED module included
SHIFT PRO PATENTED and REGISTERED DESIGN

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.

This product contains a light source of energy efficiency class (EPREL - European Product Registry for Energy Labelling): E.

LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire min. 70.000 hours Ta 25°C, min. 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

ELECTRONIC EQUIPMENT SENSITIVE TO OVERVOLTAGE.
We recommend installing surge protection devices "SPD" in the electrical system. Protection devices prevent the intensity of these phenomena’s, protecting the appliances from the risk of being damaged and extending the lifespan. Outdoor luminaires are subject to all types of permanent, temporary, or transient electrical disturbances. Such disturbances can create permanent damage or failure affecting its performance and durability. The surge protection device (supplied by SIMES) is utilized to limit the destructive effect of these phenomena. We suggest that each luminaire must be connected to one protection device at not more than 10m away. For correct coordination of the protections, a surge protection device must also be provided inside the electrical panel of the system (the selection of this device must be carried out from the electrical designer and is not supplied by SIMES).

WARRANTY
All items produced from 01/01/2026 onwards are covered by a 5 (five)-year warranty against manufacturing and conformity defects, in accordance with the terms and limits set out in the manufacturer’s official documentation. For full details, exclusions and warranty activation procedures, please refer to the following link: www.simes.it/warranty