SIMES S.p.A.
Please personalise the technical sheet if necessary S.2301W
Project
Architect / Designer
Reference Number
Tel.
Fax
Quantity
E-mail
 

TECHNICAL DATA SHEET ART. S.2301W - CONTINUOUS ROD MINIMAL SURFACE
CONTINUOUS ROD MINIMAL SURFACE - S.2301W
 
MODULES LED 3000K 24V 750lm CRI 80 MacAdam step 3
Rated luminaire luminous flux: 725lm
Rated input power: 11.5W
Luminaire efficacy: 63lm/W
Requires remote power supply
 
IP 65
 
LUMINAIRE TYPE
Wall or Ceiling mounted luminaire. IP rating IP 65

MATERIAL CHARACTERISTICS
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 (Minimal) or EN AW-6060 (Comfort) caps for the extruded parts. Mechanical resistance IK 08

LIGHTING PERFORMANCE
Continuous Rod is available in 4 different light source colors (Yellow, Red, Green and Blue LEDs colours) on request with surcharge. Continuous light source made of opal silicone. Lamp fixed position. LOR --

INSTALLATION AND MANTEINANCE
Cutting off and continuity: The light source and the aluminium profile of Continuous Rod can be easily cut off and aligned continuously to reach the desired length. The light source is delivered in a continuous length of max. 3m and can be cut off every 5cm. The aluminium profile comes in lengths of 1m, 2m or 3m, alignable between themselves in a continous and linear manner using the specific joint delivered with the luminaire (exception made for the recessed brickwall installation with the recessed housing). CONTINUOUS ROD MINIMAL SURFACE MOUNT: The extruded profile does not allow supply cables passing through inside. Hence, the corrugated tube for the supply must be installed at the beginning of the luminaire.
CONTINUOUS ROD COMFORT SURFACE MOUNT: is made up of a light source delivered with 5m of cable and of an extruded profile that allows the placement of the plastic through wiring duct (22mm x 10mm max.) and the passage of the cable inside. Moreover, the supply cable of the luminaire next to it may also be fitted. Hence, according to the location of the corrugated tube, up to 4 luminaires may be powered (the maximum length being 12m).

WIRING
Supply 5m cable section type PVC. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 0.68 Kg Glow Wire test: --
L.E.D circuit included.

This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user (Regulation UE 874/2012).

LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.
Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.

EMERGENCY VERSIONS
The fittings operates both on AC ( 50/60Hz ) and DC ( 0Hz ) voltage.
 
ACCESSORIES
 
S.2420
REMOTE POWER SUPPLY DIMMABLE 35W IP20

Dimmable DALI, PUSH DIM, DSI for monochromatic LED 35W 240V/24V DC IP20 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 195mm x43mm x30,2mm
S.2416
REMOTE POWER SUPPLY DIMMABLE 75W IP67

Dimmable DALI for monochromatic LED 75W 240V/24V DC IP67 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 280 x 40x 28mm
S.2415
REMOTE POWER SUPPLY DIMMABLE 24W IP67

Dimmable DALI for monochromatic LED 24W 240V/24V DC IP67 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 185 x 35x 33mm
S.2430
REMOTE MULTI-POWER SUPPLY 230V/250mA-700mA or 24V

MULTI-POWER SUPPLY 230V/250mA-700mA Maximum power consumption 20W or 16W 230V/24V DC Dimensions 110mm x50mm x20mm IP20 CLASS II SELV
S.2439
REMOTE DIMMABLE 1-10V, PUSH DIM DIMMABLE POWER SUPPLY IN BOX IP67

1-10V, PUSH DIM DIMMABLE MULTI-POWER SUPPLY 230V/250mA-700mA Maximum power consumption: 20W or 16W 230V/24V DC Dimensions 175,5mm x86,5mm x43mm IP67 CLASS II SELV
S.2438
REMOTE DALI DIMMABLE POWER SUPPLY IN BOX IP67

DALI DIMMABLE MULTI-POWER SUPPLY 230V/250mA-700mA Maximum power consumption: 20W or 16W 230V/24V DC Dimensions 175,5mm x86,5mm x43mm IP67 CLASS II SELV
S.2435
REMOTE POWER SUPPLY IN BOX IP67

MULTI-POWER SUPPLY 230V/250mA-700mA Maximum power consumption 20W or 16W 230V/24V DC Dimensions 175,5mm x86,5mm x43mm IP67 CLASS II SELV
S.2426
REMOTE POWER SUPPLY DIMMABLE 120W IP67

Dimmable DALI for monochromatic LED 120W 240V/24V DC IP67 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 191 x 63x 37,5mm
S.2428
REMOTE POWER SUPPLY DIMMABLE 90W IP67

Dimmable 1-10V for monochromatic LED 90W 240V/24V DC IP67 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 171 x 63x 37,5mm
S.2422
REMOTE POWER SUPPLY DIMMABLE 100W IP20

Dimmable DALI, PUSH DIM, DSI for monochromatic LED 100W 240V/24V DC IP20 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 295 x 43x 29,8mm
S.2424
REMOTE POWER SUPPLY DIMMABLE 60W IP20

Dimmable 1-10V, PUSH DIM for monochromatic LED 60W 240V/24V DC IP20 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 125 x 82x 29mm
S.2421
REMOTE POWER SUPPLY DIMMABLE 60W IP20

Dimmable DALI, PUSH DIM, DSI for monochromatic LED 60W 240V/24V DC IP20 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 225 x 43x 29,8mm
S.2406
ELECTRONIC NOT DIMMABLE POWER SUPPLY 90W 24V DC IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 171 x 63 x 37,5 mm
S.2405
ELECTRONIC NOT DIMMABLE POWER SUPPLY 60W 24V DC IP67

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 150 x 53 x 21 mm
S.2404
BOX IP 55 WITH NOT DIMMABLE ELECTRONIC POWER SUPPLY 90W 24V DC

Dimensions:  260 x 240 x 100 mm.
Cable IN:     2 with cable glands PG11
Cable OUT: 5 with cable glands PG11
IP55 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver.
S.2403
ELECTRONIC NOT DIMMABLE POWER SUPPLY 100W 24V DC IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 295 x 43 x 29,8 mm
S.2402
BOX IP 55 WITH NOT DIMMABLE ELECTRONIC POWER SUPPLY 60W 24V DC

Dimensions:  260 x 240 x 100 mm.
Cable IN:     2 with cable glands PG11
Cable OUT: 5 with cable glands PG11
IP55 CLASS II SELV The Total power of all connected luminaires may not be higher than the power of the driver.
S.2401
ELECTRONIC NOT DIMMABLE POWER SUPPLY 60W 24V DC IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 225 x 43 x 29,8 mm
S.2400
ELECTRONIC NOT DIMMABLE POWER SUPPLY 35W 24V DC IP20

In: 240V Alternate Current
Out: 24V Direct Current.
The Total power of all connected luminaires may not be higher than the power of the driver. CLASS II SELV Dimensions: 195 x 43 x 30,2 mm
S.2427
REMOTE POWER SUPPLY DIMMABLE 60W IP67

Dimmable 1-10V for monochromatic LED 60W 240V/24V DC CLASS II SELV IP67 The Total power of all connected luminaires may not be higher than the power of the driver. Dimensions 150x53x35mm
S.2425
BOX WITH DALI, 1-10v and PUSH-DIM REMOTE POWER SUPPLY

90W 230V/24V DC Dimensions 260mm x240mm x100mm IP55 SELV CLASS II
S.2423
BOX WITH DALI, 1-10v and PUSH-DIM REMOTE POWER SUPPLY

60W 230V/24V DC Dimensions 260mm x240mm x100mm IP55 SELV CLASS II
S.2305
90° JUNCTION ACCESSORY FOR SINGLE FLAT SURFACES

All surface mounted versions may be connected to create luminous angles at 90° in relation to a single installation plan (wall or ceiling) with the specific accessories.
S.2306
90° JUNCTION ACCESSORY FOR PERPENDICULAR SURFACES

Luminous angles at 90° on two perpendicular surfaces (ceiling/wall or wall/wall) can be achieved as well. Also in this case specific accessories are needed.