|Mounting instruction sheet|
|Txt only Specs sheet|
|* Autocad DXF|
|Aluminium grey (.14)|
|download available only
for registered users.
|CONTINUOUS ROD MINIMAL SURFACE|
S.2301WMODULES LED 3000K 24V 750lm CRI 80 MacAdam step 3
Rated luminaire luminous flux: 725lm
Rated input power: 11.5W
Luminaire efficacy: 63lm/WRequires remote power supply
Wall or Ceiling mounted luminaire. IP rating IP 65
Fixing base in extruded anodized EN AW-6060 aluminium housing (copper free) with high corrosion resistance. Transparent silicone end caps for LED circuit and aluminium EN AW-47100 (Minimal) or EN AW-6060 (Comfort) caps for the extruded parts. Mechanical resistance IK 08
Continuous Rod is available in 4 different light source colors (Yellow, Red, Green and Blue LEDs colours) on request with surcharge. Continuous light source made of opal silicone. Lamp fixed position. LOR --
INSTALLATION AND MANTEINANCE
Cutting off and continuity: The light source and the aluminium profile of Continuous Rod can be easily cut off and aligned continuously to reach the desired length. The light source is delivered in a continuous length of max. 3m and can be cut off every 5cm. The aluminium profile comes in lengths of 1m, 2m or 3m, alignable between themselves in a continous and linear manner using the specific joint delivered with the luminaire (exception made for the recessed brickwall installation with the recessed housing). CONTINUOUS ROD MINIMAL SURFACE MOUNT: The extruded profile does not allow supply cables passing through inside. Hence, the corrugated tube for the supply must be installed at the beginning of the luminaire.
CONTINUOUS ROD COMFORT SURFACE MOUNT: is made up of a light source delivered with 5m of cable and of an extruded profile that allows the placement of the plastic through wiring duct (22mm x 10mm max.) and the passage of the cable inside. Moreover, the supply cable of the luminaire next to it may also be fitted. Hence, according to the location of the corrugated tube, up to 4 luminaires may be powered (the maximum length being 12m).
Supply 5m cable section type PVC. Isolation: CLASS III . Available colours: White (cod.01), Aluminium grey (cod.14). Weight: 0.68 Kg Glow Wire test: --
L.E.D circuit included.
This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.
LED circuit boards are engineered accordingly to actual Lumen Maintenance regulation (LM80) and Technical Memorandum (TM21) where uniformity and quality of light is 50.000 hours referred to L70 B20 Ta 25°C.
Lifecycle refers to LED circuit boards only, all others components of the luminaire are excluded.